"Loading contents..." when trying to view object contents
- Handy Low
- Posts: 231
- Joined: Fri Nov 08, 2013 3:38 pm
- Location: Yorkshire, England
- Has thanked: 207 times
- Been thanked: 140 times
- Contact:
Re: "Loading contents..." when trying to view object content
Thanks Ilan, I'll look out for that the next time it happens in my own worlds and report back.
Handy Low
- Handy Low
- Posts: 231
- Joined: Fri Nov 08, 2013 3:38 pm
- Location: Yorkshire, England
- Has thanked: 207 times
- Been thanked: 140 times
- Contact:
Re: "Loading contents..." when trying to view object content
OK, I've managed to check the stats while it was happening. There was no spike in lost packets, but the packets sent and received remained high all the time I had the prim contents open in the editor.
This graph shows the increased activity while I had the prim open, with the troughs corresponding exactly to when I closed the editor:
https://gyazo.com/d8f0f187f4ae29659533509acf743198
The only other activity while I was there was IM chat, which was happening pretty much constantly during that period.
This graph shows the increased activity while I had the prim open, with the troughs corresponding exactly to when I closed the editor:
https://gyazo.com/d8f0f187f4ae29659533509acf743198
The only other activity while I was there was IM chat, which was happening pretty much constantly during that period.
Handy Low
- Kayaker Magic
- Posts: 354
- Joined: Sun Dec 01, 2013 8:40 am
- Has thanked: 52 times
- Been thanked: 393 times
Re: "Loading contents..." when trying to view object content
Handy, you are not alone. This has happened to me. Not very often but usually when I'm in a hurry, have another appointment, need to just see the inventory again for ONE SECOND.
I think it has happened to me on other grids, but I can't be sure. I always assume it is caused by OpenSim or the Viewer not recovering from a lost packet.
I think it has happened to me on other grids, but I can't be sure. I always assume it is caused by OpenSim or the Viewer not recovering from a lost packet.
- These users thanked the author Kayaker Magic for the post:
- Handy Low
- Handy Low
- Posts: 231
- Joined: Fri Nov 08, 2013 3:38 pm
- Location: Yorkshire, England
- Has thanked: 207 times
- Been thanked: 140 times
- Contact:
Re: "Loading contents..." when trying to view object content
Thanks, Kayaker. Someone else I was talking to today said it occasionally happened to them, but not often.
It's happened to me on about eight different occasions today already. My role in Kitely involves a lot of accessing prim contents, but I'm surprised that it's such a difference - surely any busy merchant such as yourself will be opening containers all the time?
EDITED to add: In fact, while I was writing this another prim contents was failing to load.
It's happened to me on about eight different occasions today already. My role in Kitely involves a lot of accessing prim contents, but I'm surprised that it's such a difference - surely any busy merchant such as yourself will be opening containers all the time?
EDITED to add: In fact, while I was writing this another prim contents was failing to load.
Handy Low
- Dot Matrix
- Posts: 1626
- Joined: Sun Jul 28, 2013 3:26 am
- Has thanked: 1209 times
- Been thanked: 2326 times
Re: "Loading contents..." when trying to view object content
This happens to me as well. I've just experienced it on a hypergrid-enabled minigrid using an avie native to that grid.
The contents of the first couple of objects opened fine (I was tweaking a script), but the next went into "Loading contents..." mode.
The contents tab in each case contained a script and a sound.
The contents of the first couple of objects opened fine (I was tweaking a script), but the next went into "Loading contents..." mode.
The contents tab in each case contained a script and a sound.
- These users thanked the author Dot Matrix for the post:
- Handy Low
- Handy Low
- Posts: 231
- Joined: Fri Nov 08, 2013 3:38 pm
- Location: Yorkshire, England
- Has thanked: 207 times
- Been thanked: 140 times
- Contact:
Re: "Loading contents..." when trying to view object content
Thanks Dot, that's interesting, especially since it confirms it can happen on prims with only a couple of items in the contents.
Handy Low
- Handy Low
- Posts: 231
- Joined: Fri Nov 08, 2013 3:38 pm
- Location: Yorkshire, England
- Has thanked: 207 times
- Been thanked: 140 times
- Contact:
Re: "Loading contents..." when trying to view object content
Another screenshot of a world statistics here (this time, one of my own worlds, with objects I own):
https://gyazo.com/552b951ff693765c6fbcc81fa4bc1c68
Ignore the first spike and trough - the activity after that is holding the edit window open during an unsuccessful attempt to access the contents (maybe 40-50 items) of a prim. Then I shift-dragged the prim to make a copy and deleted the original, and opened the copy, which successfully loaded. I held that open for a while.
There's a distinct difference between the network activity of the unsuccessful and successful attempts. I don't know if this is any help in pinning down what's happening here.
https://gyazo.com/552b951ff693765c6fbcc81fa4bc1c68
Ignore the first spike and trough - the activity after that is holding the edit window open during an unsuccessful attempt to access the contents (maybe 40-50 items) of a prim. Then I shift-dragged the prim to make a copy and deleted the original, and opened the copy, which successfully loaded. I held that open for a while.
There's a distinct difference between the network activity of the unsuccessful and successful attempts. I don't know if this is any help in pinning down what's happening here.
Handy Low
- Ilan Tochner
- Posts: 6524
- Joined: Sun Dec 23, 2012 8:44 am
- Has thanked: 4987 times
- Been thanked: 4473 times
- Contact:
Re: "Loading contents..." when trying to view object content
Thank you for the additional info Handy.
- Oren Hurvitz
- Posts: 361
- Joined: Sun Dec 23, 2012 8:42 am
- Has thanked: 19 times
- Been thanked: 499 times
- Contact:
Re: "Loading contents..." when trying to view object content
We updated Kitely today, and made loading of object contents much faster and more reliable. See: https://www.kitely.com/virtual-world-ne ... ore-fonts/
- These users thanked the author Oren Hurvitz for the post (total 4):
- Constance Peregrine • Handy Low • Selby Evans • Serene Jewell
- Handy Low
- Posts: 231
- Joined: Fri Nov 08, 2013 3:38 pm
- Location: Yorkshire, England
- Has thanked: 207 times
- Been thanked: 140 times
- Contact:
Re: "Loading contents..." when trying to view object content
This is tremendous news - thanks, Oren and Ilan!
- These users thanked the author Handy Low for the post (total 2):
- Ilan Tochner • Serene Jewell
Handy Low