Default Permissions

Ask technical support questions about other topics
Post Reply
User avatar
Natalie Oe
Posts: 41
Joined: Mon May 07, 2018 10:15 am
Has thanked: 21 times
Been thanked: 19 times
Contact:

Default Permissions

Post by Natalie Oe » Thu Jun 27, 2019 5:07 am

Hi :)

Just wondering whether we can get a fix for the default permission setting in Kitely. I've viewed the support jira referenced in this thread viewtopic.php?t=656 and it's been marked as resolved since 2016. It is currently working in other OS grids I am on, it only fails when uploading in Kitely.

Because I mostly upload textures it is becoming quite a nuisance to have to set permissions of every texture separately, even though I've been in and set default next owner permissions.

Thanks.
Nat
These users thanked the author Natalie Oe for the post:
Ilan Tochner
User avatar
Ilan Tochner
Posts: 4868
Joined: Sun Dec 23, 2012 8:44 am
Has thanked: 2587 times
Been thanked: 2626 times
Contact:

Re: Default Permissions

Post by Ilan Tochner » Thu Jun 27, 2019 1:08 pm

Hi Natalie,

We'll investigate the issue to see what we can do to fix it on Kitely.
These users thanked the author Ilan Tochner for the post:
Natalie Oe
User avatar
Natalie Oe
Posts: 41
Joined: Mon May 07, 2018 10:15 am
Has thanked: 21 times
Been thanked: 19 times
Contact:

Re: Default Permissions

Post by Natalie Oe » Fri Jun 28, 2019 2:41 am

Thanks Ilan, I appreciate it :)
Zed deTremont
Posts: 36
Joined: Wed Oct 22, 2014 5:37 am
Has thanked: 28 times
Been thanked: 61 times

Re: Default Permissions

Post by Zed deTremont » Fri Jun 28, 2019 3:05 am

Hi Nathalie,

I noticed that when you first upload actually meshes and or textures they never come in with the correct permissions as you've set in the viewer. When you just relax and look at them then. All will be correct. In the beginning I also went through the tedious process of changing the permissions. For mesh object this means also rezzing them, changing inworld, taking in inventory and blablabla.
In fact just reloading is an easier workaround, at least till at some point this is fixed.

Hope this helps and hope that Ilan can confirm that the permissions are validly changed this way.

Cheers,
Zed
User avatar
Natalie Oe
Posts: 41
Joined: Mon May 07, 2018 10:15 am
Has thanked: 21 times
Been thanked: 19 times
Contact:

Re: Default Permissions

Post by Natalie Oe » Fri Jun 28, 2019 9:03 am

Hi Zed,

Thank you for your suggestions unfortunately it isn’t a work around for me as the textures I’m uploading and then transferred to a box for selling and so I have to set the permissions before hand :)
Zed deTremont
Posts: 36
Joined: Wed Oct 22, 2014 5:37 am
Has thanked: 28 times
Been thanked: 61 times

Re: Default Permissions

Post by Zed deTremont » Fri Jun 28, 2019 10:41 am

Hi Nathalie,

I have the same problem with AO's UV's etc. Those also need to be FP and never had a problem when I relogged after uploading and before "boxing things up". Works perfectly fine really.
These users thanked the author Zed deTremont for the post:
Natalie Oe
User avatar
Natalie Oe
Posts: 41
Joined: Mon May 07, 2018 10:15 am
Has thanked: 21 times
Been thanked: 19 times
Contact:

Re: Default Permissions

Post by Natalie Oe » Fri Jun 28, 2019 9:16 pm

Hey again Zed,

I will try your relog method and see if it is a viable work around while we wait for a fix. Thanks
User avatar
Oren Hurvitz
Posts: 303
Joined: Sun Dec 23, 2012 8:42 am
Has thanked: 9 times
Been thanked: 352 times

Re: Default Permissions

Post by Oren Hurvitz » Sun Jun 30, 2019 7:20 am

Hi everyone,

We've updated Kitely today with a fix to this problem:

1. The default permissions that you select in the viewer are now applied to assets that you upload (e.g., textures).
2. In addition, the default Object permissions that you selected are now applied whenever you create new prims in-world.

Hope this helps!
Oren
These users thanked the author Oren Hurvitz for the post (total 2):
Zed deTremontChris Namaste
Zed deTremont
Posts: 36
Joined: Wed Oct 22, 2014 5:37 am
Has thanked: 28 times
Been thanked: 61 times

Re: Default Permissions

Post by Zed deTremont » Sun Jun 30, 2019 7:30 am

Super, thank you Oren, just tested it with a mesh, works perfect now
These users thanked the author Zed deTremont for the post:
Chris Namaste
Post Reply