Not sure if this would be possible? 64 region size land I find it difficult to make land parcels the right size. Would it be possible to have a function in that you could automatically divide the big region into 64 equal sized parcels.
Thank you.
Future Feature Suggestion
- Tonia Kara
- Posts: 7
- Joined: Sun May 24, 2015 12:32 pm
- Has thanked: 67 times
- Been thanked: 7 times
-
- Posts: 1314
- Joined: Sun Dec 23, 2012 2:26 pm
- Has thanked: 1134 times
- Been thanked: 1142 times
Re: Future Feature Suggestion
- These users thanked the author Graham Mills for the post (total 3):
- Tonia Kara • Ilan Tochner • Dot Matrix
- Bold Burner
- Posts: 21
- Joined: Wed Dec 15, 2021 8:41 pm
- Has thanked: 19 times
- Been thanked: 19 times
Re: Future Feature Suggestion
I not have a function but a method I used.Tonia Kara wrote: ↑Mon Dec 20, 2021 8:06 amNot sure if this would be possible? 64 region size land I find it difficult to make land parcels the right size. Would it be possible to have a function in that you could automatically divide the big region into 64 equal sized parcels.
Thank you.
I made a platform of 256x256, then hollowed it. This way you end up with a frame.
You will have 8 times 256x256 in one 'row'. And there are 8 rows.
Start in a corner and systematically work your way..
I made sure draw distance was set to high so I could make huge parcels.
I made sure my settings in build were set to no limit on dragging prims.
Also I made sure to set my settings to "double click and go to spot".
This worked for me.. and..it was still a bit tedious but I must say it went pretty fast after I had the settings done.
after that you can make squares and go on till you reach the middle. And if you would like smaller parcels then you can divide them from there.
Also.. after a while the borders also get visible on world map. which came in handy for quickly tp'ing to spots.
Also.. if you need help.. IM me..
Kind regards,
Bold
- These users thanked the author Bold Burner for the post:
- Tonia Kara