This is a short video looking at this Devokan Trust world created by Paislee Myrtle. As you can tell, I don't do much machinima and, bad workman that I am, I have to say that MS Movie Maker didn't exactly help (known to be ultra-crashy with Win8 under some circumstances). https://vimeo.com/82945763
PS: It's come to my attention that the WindLight setting I used was incorrect (too much "misty morning"). Until I find a better video editing platform (and maybe develop some relevant skillz), I'm not going to try again. However, if anyone is an experienced machinima artist looking for a subject I would encourage you to contact Dot or Paislee Myrtle. I'll leave the video online for the moment but it will probably fade away in due course.
PS: moved apostrophe to agree with world name (oops!)
Dragons' Teeth
-
- Posts: 1314
- Joined: Sun Dec 23, 2012 2:26 pm
- Has thanked: 1134 times
- Been thanked: 1142 times
Dragons' Teeth
Last edited by Graham Mills on Tue Dec 31, 2013 5:09 pm, edited 1 time in total.
- These users thanked the author Graham Mills for the post (total 5):
- Constance Peregrine • Dot Matrix • Min Tigerpaw • Ilan Tochner • Selby Evans
- Amiryu Hosoi
- Posts: 277
- Joined: Fri Sep 20, 2013 10:30 am
- Location: Netherlands
- Has thanked: 23 times
- Been thanked: 258 times
- Contact:
Re: Dragon's Teeth
Hey Graham,
I wanted to show you thin neat device, I am using iot myself for machinima and it is really good;-)
http://www.3dconnexion.com/products/spacenavigator.html
Ami
I wanted to show you thin neat device, I am using iot myself for machinima and it is really good;-)
http://www.3dconnexion.com/products/spacenavigator.html
Ami
- These users thanked the author Amiryu Hosoi for the post:
- Min Tigerpaw
Now delivering to hypergrid http://www.kitely.com/market?store=2570982
- Dot Matrix
- Posts: 1626
- Joined: Sun Jul 28, 2013 3:26 am
- Has thanked: 1209 times
- Been thanked: 2326 times
Re: Dragon's Teeth
Many thanks, Graham. There are some nice camera angles in the video, even if the misty morning makes it a very different place!
The "official" Windlight setting is (TOR) SCIFI Golden. The swollen sun, dark sky and stars colour the world's atmosphere.
The "official" Windlight setting is (TOR) SCIFI Golden. The swollen sun, dark sky and stars colour the world's atmosphere.
-
- Posts: 1314
- Joined: Sun Dec 23, 2012 2:26 pm
- Has thanked: 1134 times
- Been thanked: 1142 times
Re: Dragon's Teeth
Hi Ami
Yes, I've heard good things about it but I think I overdid the camming shots anyway. My next hardware purchase is going to be an Oculus Rift or similar (maybe, hopefully)
Yes, I've heard good things about it but I think I overdid the camming shots anyway. My next hardware purchase is going to be an Oculus Rift or similar (maybe, hopefully)
Amiryu Hosoi wrote:Hey Graham,
I wanted to show you thin neat device, I am using iot myself for machinima and it is really good;-)
http://www.3dconnexion.com/products/spacenavigator.html
Ami
- Selby Evans
- Posts: 620
- Joined: Wed Sep 04, 2013 6:00 pm
- Has thanked: 1840 times
- Been thanked: 822 times
Re: Dragon's Teeth
****************Graham Mills wrote:This is a short video looking at this Devokan Trust world created by Paislee Myrtle. As you can tell, I don't do much machinima and, bad workman that I am, I have to say that MS Movie Maker didn't exactly help (known to be ultra-crashy with Win8 under some circumstances). https://vimeo.com/82945763
PS: It's come to my attention that the WindLight setting I used was incorrect (too much "misty morning"). Until I find a better video editing platform (and maybe develop some relevant skillz), I'm not going to try again. However, if anyone is an experienced machinima artist looking for a subject I would encourage you to contact Dot or Paislee Myrtle. I'll leave the video online for the moment but it will probably fade away in due course.
The only incorrect video is the one you don't make because you don't think it will be good enough. Here is an article I posted a while back about resources for making videos in virtual worlds
http://virtualoutworlding.blogspot.com/ ... rtual.html
I use Camtasia now, but have used WMM in the past. (Never on Win8, thank God.) There are other suggestions in above article, including a free-ware.
I sometimes run (embed) videos in my blog, so if anybody makes one (Prefereablu 5-10 mins) I would be glad to hear about it. I think YouTube is best for an embedded video source. Vimeo sometimes pulls videos after a while.
- Dundridge Dreadlow
- Posts: 616
- Joined: Mon May 06, 2013 2:23 pm
- Location: England
- Has thanked: 590 times
- Been thanked: 339 times
-
- Posts: 1314
- Joined: Sun Dec 23, 2012 2:26 pm
- Has thanked: 1134 times
- Been thanked: 1142 times
Re: Dragon's Teeth
Sadly it doesn't work with Nvidia mobile versions so I can't help. Nice to know about though. What's the issue?
Dundridge Dreadlow wrote:there an easy way to get Nvidia shadowplay working with Kitley ?
- Dundridge Dreadlow
- Posts: 616
- Joined: Mon May 06, 2013 2:23 pm
- Location: England
- Has thanked: 590 times
- Been thanked: 339 times
Re: Dragons' Teeth
nvidia shadowplay does hardware video recording of full screen games with very little performance hit. MOST full screen games record seamlessly with zero effort. There are very few configuration options. Very few. Firestorm in full screen mode is totally ignored.