error connecting grid
Posted: Mon Dec 31, 2018 9:40 pm
Hi All,
I have a non-hypergrid grid working with port http://world.domainname:8002
I followed the instructions on
https://kitely.atlassian.net/wiki/space ... grid+Grids
and I have also changed the server's IP tables to allow 50.18.48.24/32 to connect to port 8102.
So I go to the Kitely Grid Manager screen, click Add and enter world.domainname:8102 as the hypergrid address and click OK. It responds by opening a screen with the Grid Name filled in correctly, so apparently Kitely is able to connect to my robust server.
So next I fill in my avatar name and click Send Notecard. I get an error after a couple seconds:
"We couldn't contact the grid at this address (world.dreamnation.net:8102). Either the address is incorrect; the grid doesn't support Hypergrid; or we were blocked by a firewall."
Debugging at the Robust console, I see that Kitely connects to the 8102 port and wants to do a get_uuid RPC. But that RPC is only valid on port 8002.
So I tried all that using world.domainname:8002 and it is still able to retrieve the grid name. But alas I still get an error when trying to send the notecard, but it takes a little longer (15 secs maybe):
"Failed to communicate with the server."
Which am I supposed to add to kitely, the :8102 or the :8002 address? And any more suggestions on how to make this work?
Thanks.
I have a non-hypergrid grid working with port http://world.domainname:8002
I followed the instructions on
https://kitely.atlassian.net/wiki/space ... grid+Grids
and I have also changed the server's IP tables to allow 50.18.48.24/32 to connect to port 8102.
So I go to the Kitely Grid Manager screen, click Add and enter world.domainname:8102 as the hypergrid address and click OK. It responds by opening a screen with the Grid Name filled in correctly, so apparently Kitely is able to connect to my robust server.
So next I fill in my avatar name and click Send Notecard. I get an error after a couple seconds:
"We couldn't contact the grid at this address (world.dreamnation.net:8102). Either the address is incorrect; the grid doesn't support Hypergrid; or we were blocked by a firewall."
Debugging at the Robust console, I see that Kitely connects to the 8102 port and wants to do a get_uuid RPC. But that RPC is only valid on port 8002.
So I tried all that using world.domainname:8002 and it is still able to retrieve the grid name. But alas I still get an error when trying to send the notecard, but it takes a little longer (15 secs maybe):
"Failed to communicate with the server."
Which am I supposed to add to kitely, the :8102 or the :8002 address? And any more suggestions on how to make this work?
Thanks.