Whole Build Jitters for Visitors

Ask questions about creating worlds, using worlds, etc.
Post Reply
User avatar
Jeddin Laval
Posts: 3
Joined: Sun Jun 09, 2013 3:33 pm
Has thanked: 0
Been thanked: 2 times

Whole Build Jitters for Visitors

Post by Jeddin Laval »

TarnusCity is my build, and visitors can't enter and navigate there because the whole screen jitters uncontrollably, and movement is blocked. Flying does not work. I tested this problem and reproduced it with a second avatar of my own. I noticed that the test avatar's camera misbehaves by continuing to move down until it is under her feet, no matter where she is.

There are probably settings I need to review, but I need some guidance!

Thank you,

Dana Paxson (as Jeddin Laval)
These users thanked the author Jeddin Laval for the post:
Ilan Tochner
User avatar
Ilan Tochner
Posts: 6072
Joined: Sun Dec 23, 2012 8:44 am
Has thanked: 4161 times
Been thanked: 4088 times
Contact:

Re: Whole Build Jitters for Visitors

Post by Ilan Tochner »

Hi Dana,

I just visited your world and it seems fine to me. I noticed that the entire world is covered by a gigantic structure which leads me to ask whether you tried increasing your viewer's draw distance to see if the jittering disappeared. Also, please try Rear View camera mode. If you currently have it set to Object View then the gigantic structure may be messing with your camera.
User avatar
Selby Evans
Posts: 617
Joined: Wed Sep 04, 2013 6:00 pm
Has thanked: 1812 times
Been thanked: 810 times

Re: Whole Build Jitters for Visitors

Post by Selby Evans »

I just went there and did see the jitter (on SceneGate). I found that I could TP to another part of the sim and the jitter went away. I could then return to the center and had no jitter. I found a sign: TO ENTER JEDDIN'S CITY, TOUCH HERE. I touched and found no jitter at the destination.

It looks as if there is a problem object at the landing site. I took a LM at the sign and could return there with no jitter. A simple solution might be to set the landing point at the sign. Then you could rework what you have at the original landing site object by object till you find the problem.
These users thanked the author Selby Evans for the post (total 2):
Ilan TochnerChris Namaste
User avatar
Jeddin Laval
Posts: 3
Joined: Sun Jun 09, 2013 3:33 pm
Has thanked: 0
Been thanked: 2 times

Re: Whole Build Jitters for Visitors

Post by Jeddin Laval »

Thanks! I fixed the landing site, and things seem okay now. I appreciate the help!
Dana
These users thanked the author Jeddin Laval for the post:
Ilan Tochner
User avatar
Jeddin Laval
Posts: 3
Joined: Sun Jun 09, 2013 3:33 pm
Has thanked: 0
Been thanked: 2 times

Re: Whole Build Jitters for Visitors

Post by Jeddin Laval »

There's one piece that still causes problems. At the Kitely Welcome Center, when I search up TarnusCity, and then do Enter World, it teleports me to the jitter place in TarnusCity. I don't know how to fix that location. Any help?
User avatar
Ilan Tochner
Posts: 6072
Joined: Sun Dec 23, 2012 8:44 am
Has thanked: 4161 times
Been thanked: 4088 times
Contact:

Re: Whole Build Jitters for Visitors

Post by Ilan Tochner »

User avatar
Selby Evans
Posts: 617
Joined: Wed Sep 04, 2013 6:00 pm
Has thanked: 1812 times
Been thanked: 810 times

Re: Whole Build Jitters for Visitors

Post by Selby Evans »

Take all the objects at the jitter site and see if the jitter stops. If so, put the objects back one at a time and see which object starts the jitter.
These users thanked the author Selby Evans for the post:
Ilan Tochner
Post Reply