Hi Alexina,
This isn't a standard service that we offer but we're willing to manually upload an OAR file with an offset for Discovery users who order a new Kitely Standard World, Advanced World or Mega World. We'll need you to buy at least $50 worth of KC, change your account payment method (in your Kitely account settings page) to "PayPal or Kitely Credits when available" then order the world using the New World button on the My Worlds page on our website (select a world size that matches the OAR file that you wish to upload and the empty land world template). Once that's done, send me an email with a link to the google drive where you hold the OAR file.
Please note that as this is a manual process we'll only do this for free once for every new Standard/Advanced/Mega world that you order. So make sure its a valid and working OAR file before you ask us to do this.
Water height in OAR
- Ilan Tochner
- Posts: 6686
- Joined: Sun Dec 23, 2012 8:44 am
- Has thanked: 5151 times
- Been thanked: 4626 times
- Contact:
- Alexina Proctor
- Posts: 102
- Joined: Sun Mar 16, 2014 2:32 am
- Has thanked: 774 times
- Been thanked: 117 times
- Contact:
Re: Water height in OAR
Post deleted by Alexina
Last edited by Alexina Proctor on Tue Oct 29, 2024 10:56 pm, edited 1 time in total.
--Alexina Proctor
Co-founder with Prax Maryjasz of Sendalonde Community Library
Library: hop://grid.kitely.com:8002/Sendalonde
https://about.me/alexinaproctor/
Co-founder with Prax Maryjasz of Sendalonde Community Library
Library: hop://grid.kitely.com:8002/Sendalonde
https://about.me/alexinaproctor/
- Alexina Proctor
- Posts: 102
- Joined: Sun Mar 16, 2014 2:32 am
- Has thanked: 774 times
- Been thanked: 117 times
- Contact:
Re: Water height in OAR
Thank you, Ilan. I was writing another message while you posted this. We need to be on Kitely. It is the only grid that meets the values of the Sendalonde Community Library.
Ilan Tochner wrote: ↑Mon Oct 28, 2024 4:19 amHi Alexina,
This isn't a standard service that we offer but we're willing to manually upload an OAR file with an offset for Discovery users who order a new Kitely Standard World, Advanced World or Mega World. We'll need you to buy at least $50 worth of KC, change your account payment method (in your Kitely account settings page) to "PayPal or Kitely Credits when available" then order the world using the New World button on the My Worlds page on our website (select a world size that matches the OAR file that you wish to upload and the empty land world template). Once that's done, send me an email with a link to the google drive where you hold the OAR file.
Please note that as this is a manual process we'll only do this for free once for every new Standard/Advanced/Mega world that you order. So make sure its a valid and working OAR file before you ask us to do this.
- These users thanked the author Alexina Proctor for the post:
- Ilan Tochner
--Alexina Proctor
Co-founder with Prax Maryjasz of Sendalonde Community Library
Library: hop://grid.kitely.com:8002/Sendalonde
https://about.me/alexinaproctor/
Co-founder with Prax Maryjasz of Sendalonde Community Library
Library: hop://grid.kitely.com:8002/Sendalonde
https://about.me/alexinaproctor/
- Alexina Proctor
- Posts: 102
- Joined: Sun Mar 16, 2014 2:32 am
- Has thanked: 774 times
- Been thanked: 117 times
- Contact:
Re: Water height in OAR
Ilan, I am going to ask Balpien to make me another OAR. We don’t create our own OARs on DG. As soon as I have it, I will upload to Google Drive and send you the link.
Thank you for doing this.
Thank you for doing this.
- These users thanked the author Alexina Proctor for the post:
- Ilan Tochner
--Alexina Proctor
Co-founder with Prax Maryjasz of Sendalonde Community Library
Library: hop://grid.kitely.com:8002/Sendalonde
https://about.me/alexinaproctor/
Co-founder with Prax Maryjasz of Sendalonde Community Library
Library: hop://grid.kitely.com:8002/Sendalonde
https://about.me/alexinaproctor/
- Snoots Dwagon
- Posts: 431
- Joined: Mon Jul 30, 2018 9:45 pm
- Has thanked: 457 times
- Been thanked: 791 times
Re: Water height in OAR
LOL I actually figured that out AFTER I left the forum post. Never fails. duh.Ilan Tochner wrote: ↑Sun Oct 27, 2024 9:37 pmHi Snoots,
Keep it at 20m then the -80m offset from your original 100m water height will result in the water level you want.
- These users thanked the author Snoots Dwagon for the post:
- Ilan Tochner
~~~~~~~
I'm a dwagon in real life too. (My sister totally agrees.)
~~~~~~~
I'm a dwagon in real life too. (My sister totally agrees.)
~~~~~~~
- Tess Juel
- Posts: 387
- Joined: Sun Sep 11, 2016 4:24 pm
- Has thanked: 305 times
- Been thanked: 500 times
Re: Water height in OAR
It's not always quite that easy. Offsetting the OAR will seriously mess up the ground texture and the way texture blending works on opensim, you can't simply offset the texture elevation ranges by the same amount and expect the same result. If the ground texture is important, you have to be prepared to do a lot of trial and error to get it right.Mike Chase wrote: ↑Sun Oct 27, 2024 3:17 amIf you load the oar with an offset of <0,0,-80> and then adjust the water height in the region/estate settings and rebake terrain you should be fine.
Also, I assume there is a reason why people want deeper waters. With a negative offset, there's a good chance some of the ground will end up with a negative height. With ubODE this means those parts of the region will not be accessible. With ODE or Bullet physics you can still go there but the light setting at elevations below zero will be very different (and absolutely wonderful for underwater scenes but that's another matter).
But with that being said, I don't understand how this problem occurs at all. Water level is a parameter that is supposed to be included in the OAR file so but shouldn't change if you transfer a region. I've only done it with OS 0.8 myself though, maybe something changed with OS 0.9?
Anyways, there are two better options than offsetting the OAR.
The simplest one is what Alexina mentioned in her original post: Correct the water level in-world after uploading (Alt+R - Terrain tab - Water Height).
The second is to do a double transfer. Export and import the OAR first, then go back and export and import as a RAW file. This method will certainly work and if water level is no longer supported by OAR files, it's also the only way to transfer water levels higher than 100 m.
-
- Posts: 4
- Joined: Mon Nov 04, 2024 2:35 pm
- Has thanked: 0
- Been thanked: 1 time
Re: Water height in OAR
Hey Alexina, I’ve run into something similar before when moving OARs between platforms. To get your world to match the 20m water height, you’ll need to lower the terrain a bit. I usually use the World Editor to adjust the heightmap or directly lower the land, but just keep in mind that you might need to tweak some of the builds to prevent them from floating or clipping.