I can't mark as exportable, a object that I created.
- Radioactive Rosca
- Posts: 2
- Joined: Wed Aug 20, 2014 5:17 pm
- Has thanked: 1 time
- Been thanked: 0
I can't mark as exportable, a object that I created.
I created a simple cube, modified the permissions to full perms, including anyone can copy. I took it to inventory and tried to select export permission, with the "properties option. That option is not grayed, but I can't select it. All other "next owner" options are selected.
What I'm I doing wrong?
What I'm I doing wrong?
- Constance Peregrine
- Posts: 2353
- Joined: Sun Dec 23, 2012 11:35 am
- Has thanked: 2784 times
- Been thanked: 1489 times
Re: I can't mark as exportable, a object that I created.
I was hoping for someone to answer for whom perms has importance to them [I just steal stuff...I joke!! I joke!!]Radioactive Rosca wrote:I created a simple cube, modified the permissions to full perms, including anyone can copy. I took it to inventory and tried to select export permission, with the "properties option. That option is not grayed, but I can't select it. All other "next owner" options are selected.
What I'm I doing wrong?
The viewer export checkbox is not what Kitely uses, more than that someone else actually qualified might comment to.
Laissez faire et laissez passer, le monde va de lui même!
My little sounds store https://www.kitely.com/market?store=2040306
Ephemeral wanderer...
My little sounds store https://www.kitely.com/market?store=2040306
Ephemeral wanderer...
- Keith Selmes
- Posts: 175
- Joined: Fri Jan 04, 2013 1:13 pm
- Location: Devon, UK
- Has thanked: 174 times
- Been thanked: 153 times
- Contact:
Re: I can't mark as exportable, a object that I created.
I don't think you're doing anything wrong.
If I recall rightly, Kitely began allowing export before the tick box was available in the viewer, and have never used it.
The method used is to enable Copy and Transfer permissions, then it should be exportable.
For example, full perm items can be saved as part of an OAR, but items that don't have Copy and Trans are left out, and I think you get a report detailing those items.
There is some explanation in an earlier discussion here
http://www.kitely.com/forums/viewtopic. ... 5&start=10
"What you're looking for is located in the 5th paragraph of the Proprietary Rights section of the TOS:
Items delivered by Kitely Market (as the term is defined below) are either explicitly licensed for use outside of Kitely Services (grant you "Export Permission") or are explicitly barred from use outside of Kitely Services (are marked "No-Export"). Items not delivered by Kitely Market have an implicit Export Permission if they (A) have Copy Permission; and (B) have Transfer Permission; and (C) do not contain or use any No-Export items."
If I recall rightly, Kitely began allowing export before the tick box was available in the viewer, and have never used it.
The method used is to enable Copy and Transfer permissions, then it should be exportable.
For example, full perm items can be saved as part of an OAR, but items that don't have Copy and Trans are left out, and I think you get a report detailing those items.
There is some explanation in an earlier discussion here
http://www.kitely.com/forums/viewtopic. ... 5&start=10
"What you're looking for is located in the 5th paragraph of the Proprietary Rights section of the TOS:
Items delivered by Kitely Market (as the term is defined below) are either explicitly licensed for use outside of Kitely Services (grant you "Export Permission") or are explicitly barred from use outside of Kitely Services (are marked "No-Export"). Items not delivered by Kitely Market have an implicit Export Permission if they (A) have Copy Permission; and (B) have Transfer Permission; and (C) do not contain or use any No-Export items."
- These users thanked the author Keith Selmes for the post:
- Selby Evans
- Ilan Tochner
- Posts: 6726
- Joined: Sun Dec 23, 2012 8:44 am
- Has thanked: 5248 times
- Been thanked: 4674 times
- Contact:
Re: I can't mark as exportable, a object that I created.
Hi Radioactive,
Please read:
1) http://www.kitely.com/virtual-world-new ... plemented/
2) http://www.kitely.com/virtual-world-new ... rmissions/
Please read:
1) http://www.kitely.com/virtual-world-new ... plemented/
2) http://www.kitely.com/virtual-world-new ... rmissions/
- These users thanked the author Ilan Tochner for the post:
- Radioactive Rosca
- Radioactive Rosca
- Posts: 2
- Joined: Wed Aug 20, 2014 5:17 pm
- Has thanked: 1 time
- Been thanked: 0
Re: I can't mark as exportable, a object that I created.
Thanks for your help.Ilan Tochner wrote:Hi Radioactive,
Please read:
1) http://www.kitely.com/virtual-world-new ... plemented/
2) http://www.kitely.com/virtual-world-new ... rmissions/

- Carlos Loff
- Posts: 280
- Joined: Sat Dec 28, 2013 8:58 pm
- Location: Lisbon - Portugal
- Has thanked: 263 times
- Been thanked: 191 times
- Contact:
Re: I can't mark as exportable, a object that I created.
Hi my dear friend, that is only possible if you inserting the item on the website - Market to sellRadioactive Rosca wrote:I created a simple cube, modified the permissions to full perms, including anyone can copy. I took it to inventory and tried to select export permission, with the "properties option. That option is not grayed, but I can't select it. All other "next owner" options are selected.
What I'm I doing wrong?
There is no way Inworld - to make sure you have an exportable item
Kitely - Meta Lisbon --> grid.kitely.com:8002:Meta Lisbon Startups
Join Me on Meetup --> https://www.meetup.com/metalisbonstartups/
Join Kitely Group --> Meta Lisbon Startups
Join Me on Meetup --> https://www.meetup.com/metalisbonstartups/
Join Kitely Group --> Meta Lisbon Startups
- Ilan Tochner
- Posts: 6726
- Joined: Sun Dec 23, 2012 8:44 am
- Has thanked: 5248 times
- Been thanked: 4674 times
- Contact:
Re: I can't mark as exportable, a object that I created.
Hi Carlos,
You can make sure you have an exportable item inworld if you are the creator of all its components or if you have Copy+Transfer permissions for them and you are sure that they didn't derive from Kitely Market items.
You can make sure you have an exportable item inworld if you are the creator of all its components or if you have Copy+Transfer permissions for them and you are sure that they didn't derive from Kitely Market items.
- Carlos Loff
- Posts: 280
- Joined: Sat Dec 28, 2013 8:58 pm
- Location: Lisbon - Portugal
- Has thanked: 263 times
- Been thanked: 191 times
- Contact:
Re: I can't mark as exportable, a object that I created.
Yes but if I rezz/create a simple cube of mine on my land and apply all the perms you said, I can't be sure the next Inworld visitor that right clicks that cube and copies it will be able to export it to other grid, unless I make that item available on the market page and check Export or rather I create an OARIlan Tochner wrote:Hi Carlos,
You can make sure you have an exportable item inworld if you are the creator of all its components or if you have Copy+Transfer permissions for them and you are sure that they didn't derive from Kitely Market items.
Usually what most people is concerned when they ask this question is rezzing in world, picking it up Inworld and making sure it is exportable
Kitely - Meta Lisbon --> grid.kitely.com:8002:Meta Lisbon Startups
Join Me on Meetup --> https://www.meetup.com/metalisbonstartups/
Join Kitely Group --> Meta Lisbon Startups
Join Me on Meetup --> https://www.meetup.com/metalisbonstartups/
Join Kitely Group --> Meta Lisbon Startups
- Ilan Tochner
- Posts: 6726
- Joined: Sun Dec 23, 2012 8:44 am
- Has thanked: 5248 times
- Been thanked: 4674 times
- Contact:
Re: I can't mark as exportable, a object that I created.
Hi Carlos,
People who copy the non-Kitely Market derived item will be able to export it if you set Copy and Transfer to everyone, setting them just for next owner is not sufficient.
People who copy the non-Kitely Market derived item will be able to export it if you set Copy and Transfer to everyone, setting them just for next owner is not sufficient.
- Carlos Loff
- Posts: 280
- Joined: Sat Dec 28, 2013 8:58 pm
- Location: Lisbon - Portugal
- Has thanked: 263 times
- Been thanked: 191 times
- Contact:
Re: I can't mark as exportable, a object that I created.
That is very good news and finally I think many people can have their problems solved, many thanks for that detail, cheersIlan Tochner wrote:Hi Carlos,
People who copy the non-Kitely Market derived item will be able to export it if you set Copy and Transfer to everyone, setting them just for next owner is not sufficient.
Kitely - Meta Lisbon --> grid.kitely.com:8002:Meta Lisbon Startups
Join Me on Meetup --> https://www.meetup.com/metalisbonstartups/
Join Kitely Group --> Meta Lisbon Startups
Join Me on Meetup --> https://www.meetup.com/metalisbonstartups/
Join Kitely Group --> Meta Lisbon Startups